A testing and analysis technique used by industries to evaluate the properties of a material, component, structure or system for characteristic differences or welding defects and discontinuities without causing damage to the original part. NDT is also known as non-destructive examination (NDE), non-destructive inspection (NDI) and non-destructive evaluation (NDE).
Previous
Next
Non Destructive Testing
Visual Testing (VT)
- This visual inspection is one of the most common techniques which involves the operator looking at the test piece. This can be aided by the use of optical instruments such as magnifying glasses or computer-assisted systems (known as “Remote Viewing”).
- This method allows for the detection of corrosion, misalignment, damage, cracks, and more.
- Visual testing is inherent in most other types of NDT as they will generally require an operator to look for defects.
Non Destructive Testing
Liquid Penetrant Testing (PT)
- This testing involves the application of a fluid with low viscosity to the material to be tested.
- This fluid seeps into any defects such as cracks or porosity before a developer is applied which allows the penetrant liquid to seep upwards and create a visible indication of the flaw.
- Liquid penetrant tests can be conducted using solvent removable penetrants, water washable penetrants or post-emulsifiable penetrants.
Previous
Next
Previous
Next
Non Destructive Testing
Magnetic Particle Testing (MT)
- This NDT process uses magnetic fields to find discontinuities at or near the surface of ferromagnetic materials.
- The magnetic field can be created with a permanent magnet or an electromagnet, which requires a current to be applied.
- The magnetic field will highlight any discontinuities as the magnetic flux lines produce leakage, which can be seen by using magnetic particles that are drawn into the discontinuity.
Non Destructive Testing
Ultrasonic Testing (UT)
- Ultrasonic Testing entails the transmission of high frequency sound into a material to interact with features within the material that reflect or attenuate it.
- This test is broadly divided into Pulse Echo (PE), Through Transmission (TT) and Time of Flight Diffraction (ToFD).
Previous
Next
Previous
Next
Non Destructive Testing
Radiography (RT)
- Radiographic testing uses radiation passed through a test piece to detect defects.
- X-rays are commonly used for thin or less dense materials while gamma rays are used for thicker or denser items.
- The results can be processed using film radiography, computed radiography, computed tomography or digital radiography.
- Whichever method is used, the radiation will show discontinuities in the material due to the strength of the radiation.
Non Destructive Testing
NDT Training
Our training is in accordance with European, international and American standards such as ASNT or PCN. We can provide training to Levels I and II based on ASNT SNT-TC-1A (with examination and certification in ASNT Levels I and II) and also PCN Level 3 training in a variety of NDT Techniques.
Previous
Next
Previous
Next
Non Destructive Testing
ASME Sec IX Basic Training
The objective of this introductory course that provides a basic understanding of :
- The proper use and interpretation of ASME Section IX – Welding Qualifications Code and its related ASME construction codes.
Non Destructive Testing
API 510 – Pressure vessel inspection & Inspector supply
- Our API certified inspectors in the field of Pressure Vessel (API 510) are involved in in-service inspection to ensure the continued safe use of the equipment.
- Corrosion analysis, Remaining life calculation & inspection intervals are determined to ensure the safe working environment.
Previous
Next
Previous
Next
Non Destructive Testing
API 653 – Storage tank Inspection
- We are one of the few companies having accreditation from Dubai Municipality (EIAC) to inspect the above ground storage tank as per API 653
- Our specialized engineer in the field of storage tank are involved in in-service inspections to ensure the continued safe use of the equipment.
- Corrosion analysis, Remaining life calculation & inspection intervals are determined to ensure the safe working environment.
Non Destructive Testing
CSWIP 3.1 Welding Inspector inspection & Inspector supply
- Welding Inspections.
- WPS & PQR Preparation, Consulting and Welder Qualification).
- Supply of welding inspector for long term and short term basis.
- Our specialist welding inspectors in the field of Pressure Vessels and Structural Manufacturing, have more than 13 years in the relevant field.
- Very thorough knowledge in mostly used industrial materials such as carbon steels, Alloy steels, authentic and duplex stainless steels and CR –NI alloys.
Previous
Next
SAFETY INSPECTIONS - MANDATORY
SAFETY INSPECTIONS - SPECIALIZED
SAFETY TRAININGS
Why People Choose
Elite Safety Consultants
- Unbiased Quality Service by experienced Team
- Diversified Scopes & Accreditations
- Free Consultation
- Reasonable Price with Value-added Service
- Your one stop Safety Solution Provider
Leading Third Party Inspection Company in the Region
- Do you require any assistance in Safety Inspections, Trainings or Consultancy Services?
- Are you not sure whether your equipment requires inspections and whether it is a mandatory requirement as per local Authorities?
- Have your staff attended mandatory Safety Trainings or Operator’s Training ?
- Are you looking for any other Safety related services related to Calibration, Laboratory, Fire, Environment, Energy, Electrical etc. ?
If yes, then we are the solution, your one stop safety solution provider. Contact us by entering your details and receive additional information/Quote as soon as possible.